Click for HOME
Construction Articles
All About Project33
Facts & Figures
Monthly Report
Search this Site
Helpful Tools
The P33 Toybox
Project33 Gallery
Email Project33
John Vernon's conceptual magic!
13-Dec-01 Installing the Fuel Door Part 5

Back in the Saddle Again

ImageThe filler neck drops in followed by a cork gasket and the filler cap.
ImageThe mounting holes will be drilled through the filler neck and the body. I'm going to order some flat head stainless allen bolts from MMS to hold it all together.
Here's a shot of the final location from a distance so you can see how it's positioned on the car. I don't think it turned out too bad and it should fit the look we're after.
ImageNow that the filler hole is cut I can decide where the neck on the tank will need to be re-located. It sure felt good to get back out in the garage!